FPG Hicas and Fuel Hardline to AN6 AN8 Adapters FPG-023 FPG-024 FPG-044 Size:AN6 to 8mm Line FPG-044 1x Speedflow AN6 90deg Power

1x Speedflow AN6 90deg Power Steering Hose End (High Pressure)

Line will need to be cut to slide the adapters on

-Balancing of the fuel tank level left to right (passive side to active side) not being done effectively due to the factory Venturi not operating correctly

This is the tool you need so you can do it all on the car and not spend hours removing the hubs

285 and 295 (the 295 doesn't have an outlet check valve so be aware of back feeding if used in a twin configuration)

FPG Hicas and Fuel Hardline to AN6 AN8 Adapters FPG-023 FPG-024 FPG-044 Size:AN6 to 8mm Line FPG-044 1x Speedflow AN6 90deg PowerIf you want to use your HICAS hard lines (10mm) for fuel lines in your R32GT R, then you will need these adapters. Line will need to be cut to slide the adapters on, then tighten the fitting and it's good to go (no flaring required). They will allow you to connect a AN6 or AN8 fitting to the hardline. Price is per adapter, so be sure to add the correct quantity on checkout! We also stock the 8mm fittings to turn the factory fuel lines into a AN6